Yeeco 2x50W+100W Channel Digital Power Audio Sereo Amplifier Board, DC 12-24V Car Stereo AMP Module for Audio System DIY Speakers with Volume Knob; Heatsink; 3.5 Audio Input/ DC Connector
Yeeco 2x50W+100W Channel Digital Power Audio Sereo Amplifier Board, DC 12-24V Car Stereo AMP Module for Audio System DIY Speakers with Volume Knob; Heatsink; 3.5 Audio Input/ DC Connector by Yeeco at Digital Complex. MPN: Y1600088. Hurry! Limited time offer. Offer valid only while supplies last. Product information: Power supply: DC 12-24V Output power: 50W*2 100W*1(Subwoofer) Output load: 4-8Ω Respond range: 14-100KHz SNR: 100db Channel
Power supply: DC 12-24V
Output power: 50W*2 100W*1(Subwoofer)
Output load: 4-8Ω
Respond range: 14-100KHz
Channel amount: 3 (left+right+subwoofer)
Switch frequency: 1.2MHz
Size: 100mm*70mm*30mm (length * width * height)
Please note that noise will happen in these situation:
-Power supply is not sufficient or not stable;
-Using switch power supply
-Using transformer as power supply and without shield & isolation; wdo not avoid interference
-Local at the environment with electromagnetic interference
-Audio input has its own problem
-Audio driver setting
-Music Player effects setting
(1)Hardware problem-> The power supply should not be placed too close to the amplifier board in order to avoid electromagnetic interference. It is better to use high quality power supply which offers stable power. If you use power transformer, using an iron sheet to cover the transformer is highly recommended.
(2)Software problem-> When you connect the amplifier to telephone or computer, you can turn off the special effects software or sound card driver effects settings. Using the software after making sure they will not take effect on the sound effect.
Features & Highlights
- DC 12-24V power supply audio amplifier; great for connecting to telephone or computer; DIY speaker; vehicle auto; home theater; music playing on the street/ square/ shopping mall sound amplify
- Two chips - one for the left/ right channel power amplify and the second is in bridge connection with the front NE5532 to drive the subwoofer
- Digital amplify chip, up to 90% efficiency, low idle loss and high heat dissipation; 1.6mm circuit board, smooth surface, heat resistant and tide resistant
- With DC power supply connection port and DC 12-24V wiring terminals (please do not use in the same time); 3.5mm audio input jack; 3-pin audio input jack; Volume/ Subwoofer/ Stereo knob adjustment
- Several symmetrically mounted capacitances, big capacity, great filtering and energy storage function; Inductance coil has inhibition for the AC; European style wiring terminal
|Item Size:||1.18 x 2.76 x 2.76 inches|
|Package Weight:||0.4 pounds|
|Package Size:||4.5 x 2 x 2 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Yeeco, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: HDA-912, ean: 0861586000200,
The OREI HDA-912 HDMI 18Gbps Audio Extractor converter is designed to output audio signals from any HDMI compliant source to digital optical or analog stereo L/R audio outputs. Both input and output HDMI ports are full 2.2 HDCP compliant with CEC byp...
By Douk Audio
mpn: GFJ611, ean: 3265575524314,
Parameters: Size (W×D×H): 133 * 149 * 36 mm / 5.24 * 5.87 * 1.42 in Input Sensitivity: ≤280mV Net Weight: 560 g / 1.23 lb Frequency: 50Hz-60Hz Voltage: DC 12V-25V, 3A above Resolution: ≥90dB Harmonic Distortion: ≤0.5% Load Impedance: 4Ω-8Ω ...
mpn: FSAKG47DJSKAGD, ean: 0743022314976,
It's designed to optimize the circuit layout. Sound quality is very good and it can drive 4/6/8/16 ohm speakers. Bluetooth V4.0, it has sufficient power output 2*50W. Features: Sound quality is very good by using this module. Using CSR8635 Bluetoo...
mpn: 4328317119, ean: 0711176888872,
This BLUESKY HDMI Audio Extractor is designed to extract the digital audio embedded in HDMI source and output it via optical SPDIF or 3.5mm stereo audio out. Origianl video/audio signal is also passed through to HDMI output. Then you will be able to ...
mpn: 4330356637, ean: 6245435006744,
Adopt "CSR", true digital signal output, support 5.1.Supports lossless music playback, you can directly with pure digital amplifier / DAC / etc.Bluetooth version 3.0, does not support APTX format.Can be directly connected to digital amplifier. Audio ...
By Fosi Audio
Parameter:1. Power supply range: 12v-24v;2. THD: ≤ 0.04%;3. Frequency Range: 20Hz - 20kHz (±1 dB);4. SNR: ≥ 98dB;5. Input sensitivity: ≤ 280mV;6. Terminating impedance: 2Ohm - 8 Ohm;7. Output power: 50W + 50W;8. Input mode: Analog RCA;9. Headp...
mpn: JAR-HDMI-AUDIO-01, ean: 0766330200960,
Introduction: JarGaBo HDMI to HDMI and audio converter not only to meet the ideal image of the HDTV but also to meet the need for an extract audio from HDMI source. This HDMI Audio Splitter is designed to extract the digital audio embedded in HDMI so...
mpn: ASB900, ean: 0899390002905,
Apex Digital ASB-900 40" HD Sound Home Theater Soundbar 250-Watts Bluetooth streams music from smartphones and computers|250 watts maximum output|LED display|Two aux inputs, Two PCM digital inputs|1.5-meter digital optical cable Apex Sound Bar Speake...
Introduction: This audio decoder can auto convert HDMI input to 5.1 channel analog audio output, and support decoding Dolby AC-3/DTS(include 5.1 RAW digital audio streaming). So it is widely used in families, schools, squares, concert halls, cinemas ...
mpn: AER-HC001B, ean: 0613852713846,
This Aerctor HDMI Audio Exractorc can be used for those amplifiers or receivers that does not have HDMI inputs. Specifications - Iuput Port: 1xHDMI IN,1xDC 5V Port,3xEDID Audio(Pass/2CH/5.1CH) - Output Port:1xHDMI OUT,1xSPDIF(Optical),2xRCA L/R Audi...